ROLAND STIKA PLUS STX 8 DRIVER FOR WINDOWS 7 17
Click Here ->>->>->> https://urllio.com/2tylBx
How to Install Roland Stika Plus STX 8 Driver for Windows 7
If you have a Roland Stika Plus STX 8 vinyl cutter and want to use it with Windows 7, you may have trouble finding the right driver. Roland does not provide a driver for Windows 7, but you can use the driver for Windows Vista instead. Here are the steps to install the driver and use the cutter with Windows 7.
Download the driver for Windows Vista from Roland's website.[^2^] Choose the version that matches your Windows 7 system (32-bit or 64-bit).
Extract the downloaded file and run the setup.exe file. Follow the instructions on the screen to install the driver.
Connect your Roland Stika Plus STX 8 to your computer with a USB cable. Turn on the cutter and wait for Windows to detect it.
Go to Control Panel > Devices and Printers and find your cutter. Right-click on it and select Properties.
Go to the Hardware tab and click on Properties. Go to the Driver tab and click on Update Driver.
Select Browse my computer for driver software and browse to the folder where you extracted the driver file. Click Next and wait for Windows to install the driver.
Click Close and OK to finish. Your cutter should now be ready to use with Windows 7.
To use your cutter, you need to install Dr. Stika Plus software, which is compatible with Windows 7. You can download it from Roland's website.[^1^] Follow the instructions on the screen to install the software and create your designs. You can also import images from other programs and cut them with your cutter.
Enjoy your Roland Stika Plus STX 8 vinyl cutter with Windows 7!Here are some tips and tricks to make the most of your Roland Stika Plus STX 8 vinyl cutter with Windows 7.
To adjust the cutting speed and force, use the buttons on the cutter. Press the MENU button until you see the desired setting on the display. Use the UP and DOWN buttons to change the value. Press the ENTER button to confirm.
To perform a test cut, press the TEST button on the cutter. The cutter will cut a small square and a circle on the vinyl. Check the quality of the cut and adjust the speed and force if needed.
To load the vinyl, lift the lever on the back of the cutter and insert the vinyl from behind. Align the edges of the vinyl with the guide marks on the cutter. Lower the lever to secure the vinyl.
To unload the vinyl, press the FEED button on the cutter. The cutter will feed out the vinyl. Lift the lever and remove the vinyl.
To cut your design, open Dr. Stika Plus software and create or import your design. Click on File > Print and select your cutter as the printer. Click on Properties and choose your cutting options. Click OK and then Print. The cutter will start cutting your design.
To weed out the excess vinyl, use a weeding tool or a pair of tweezers to peel off the unwanted parts of the vinyl. Be careful not to damage your design.
To transfer your design to another surface, use a transfer tape or a sheet of paper to cover your design. Press firmly and peel off the backing paper of the vinyl. Place your design on the desired surface and press firmly. Peel off the transfer tape or paper slowly and carefully.
That's it! You have successfully installed and used your Roland Stika Plus STX 8 vinyl cutter with Windows 7. Have fun creating stickers, decals, labels, signs and more with your cutter! 061ffe29dd